|
|
|
|
10.7.3 Test
Procedures for Monolithic Ceramics
DIN EN 623-1 (04.95) General and structural
properties; Testing for the presence of surface faults through
colour penetration tests
DIN EN 623-2 (11.93) General and structural characteristics;
Determining density and porosity
DIN EN 623-3 (04.93) General and structural characteristics;
Determining grain size
DIN EN 623-4 (11.93) General and structural characteristics;
Determining surface roughness
DIN EN 623-5 (10.02) General and structural characteristics;
Determining the proportions by volume of different phases
through analysis of microstructure photographs
DIN V ENV 820-1 (02.94) Thermomechanical properties; Determining
bending strength at elevated temperatures
DIN EN 820-2 (11.92) Thermomechanical properties; Determining
deformation from unloaded weight
DIN V ENV 820-3 (02.94) Thermomechanical properties; Determining
thermal shock resistance using the water quenching test
DIN V ENV 820-4 (12.01) Thermomechanical properties; Determining
creep under bending stresses at elevated temperatures
DIN EN 821-1 (04.95) Thermophysical characteristics; Determining
thermal expansion
DIN EN 821-2 (08.97) Thermophysical characteristics; Measuring
thermal conductivity using the laser flash (or heat impulse)
method
DIN V ENV 821-3 (11.93) Thermophysical properties; Determination
of specific heat
DIN EN 843-1 (04.95) Mechanical properties at room temperature;
Determination of flexural strength
DIN V ENV 843-2 (02.96) Mechanical properties at room temperature;
Determination of elastic modulus
DIN V ENV 843-3 (11.96) Mechanical properties at room temperature;
Determining the parameters for subcritical crack growth from
bending strength tests with
constant stressing rates
DIN V ENV 843-4 (10.94) Mechanical properties at room temperature;
Vickers, Knoop and Rockwell hardness testing
DIN V ENV 843-5 (01.97) Mechanical testing at room temperature;
Statistical analysis
DIN V ENV 1006 (04.93) Guidelines for sampling and taking
samples
DIN V ENV 12923-1 (02.98) Monolithic ceramics; General considerations
on the execution of corrosion tests
DIN V ENV 12923-2 (05.02) Monolithic ceramics; Oxidation tests
DIN EN 50324-1 (12.02) Piezo-electric properties of ceramic
materials and components; Terminology
DIN EN 50324-2 (12.02) Piezo-electric properties of ceramic
materials and components; Measurement procedures – small
signals
DIN EN 50324-3 (04.01) Piezo-electric properties of ceramic
materials and components; Measurement procedures – large
signals
DIN prEN 50359-1-1 (07.01) High-performance ceramics; electrical
properties; Procedures for testing dielectric strength, short-term
behaviour
DIN prEN 50359-2-1 (07.01) High-performance ceramics; electrical
properties; procedures for determining the specific surface
and volume resistances over the temperature range 20°C
to 800°C
DIN 51069-2 (11.72) Testing ceramic raw materials and processed
materials; comparative test of the behaviour of fireproof
materials in response to attack by solid and liquid substances
at high temperature, crucible method
DIN 51110-3 (09.93) Testing high performance ceramic materials;
4-point bending test; static analysis; determination of the
Weibull parameter
DIN IEC 60483 (04.88) Guideline for determining the dynamic
properties of piezo-electric ceramics with high electro-mechanical
coupling factors
DIN IEC 60642 (04.88) Piezo-electric vibrators and resonators
for frequency stabilisation and selection; standard values
and conditions; measurement and test procedures
DIN 51045-2 (10.76) Determination of the change in length
of solid bodies under the influence of heat; testing fired
fine ceramic materials
DIN 51045-3 (10.76) Determination of the change in length
of solid bodies under the influence of heat; testing unfired
fine ceramic materials
ISO 14704 (08.00) Determination of the flexural strength of
monolithic ceramics at room temperature
ISO 14705 (03.00) Test method for hardness of monolithic ceramics
at room temperature
ISO 15490 (07.00) Test procedure for determining the tensile
strength of monolithic ceramics at room temperature
prISO/DIS 15732 (06.99) Test procedure for determining the
fracture toughness of monolithic ceramics at room temperature
on bending samples notched on one side (SEPB procedure)
ISO 17532 (10.01) Test procedure for determining the linear
thermal expansion of monolithic ceramics at room temperature
using the push-rod method
prISO 17565 (10.01) Test procedure for determining the bending
strength of monolithic ceramics at elevated temperatures
prISO/DIS 18756 (05.02) Determination of fracture toughness
of monolithic ceramics at room temperature by the surface-crack-in-flexure-method
(SCF)
prISO/DIS 20509 (05.02) Determination of oxidation resistance
of non-oxide monolithic ceramics
ASTM C 768 (1999) Determining the resistance of refractory
stones to molten slags
ASTM C 874 (1999) Testing the slagging resistance of refractory
materials
|
|
|
|